• Interface Bandwidth Summary – this report must be used with a tagged item when selecting an All Devices report, as described in the Defining Sites and Tags section of Chapter 4 – Basic Setup. For All Devices, this creates a separate report for each device counting the total flows, total bytes, total packets, average bit rate, average packet rate, peak bit rate and peak packet rate of every tagged interface.

• Bandwidth Summary – creates a separate Inbound, Outbound and Inbound and Outbound report, listing the device and interface names, the total flows, total bytes, total packets, average bit rate, average packet rate, peak bit rate and peak packet rate.

• Traffic Volume Pair – shows flow data associated with the interfaces on the device selected. It should be noted that some interfaces that are shown in the chart and table may not exist on the device. For those interfaces, it is not possible to drill down to a Top Analysis report.

• Outbound Bandwidth Utilization – shows flow data from interfaces on the device selected. Default is outbound.

• Bidirectional Network Pair – shows flow data between source and destination subnet pairs. Default is outbound.

• Source or Destination Network – shows flow data from all subnets, regardless if it is a source or destination network. Default is Inbound and Outbound.

• Network Pair – shows flow data across a directed network pair: source (the first subnet) to a destination (the second subnet). Default is Outbound. • Source Network – shows flow data by source subnet. Default is Inbound.

• Destination Network – shows flow data by destination subnet. Default is Outbound.

• Bidirectional AS Pair – shows flow data between source and destination autonomous system pairs. Default is Outbound.

• Source or Destination AS – shows flow data from all autonomous system numbers, regardless if it is a source or destination. Default is Inbound and Outbound.

• AS Pair – shows flow data across a directed autonomous system pair: source (first AS) to a destination (second AS). Default is Outbound.

• Source AS – shows flow data by source autonomous system number. Default is Inbound.

• Destination AS – shows flow data by destination autonomous system number. Default is Outbound.